How to Clean a Dyson Vacuum

If you want to keep your Dyson vacuum cleaner running for as long as possible, clean it regularly. This doesn’t take much time and will make your Dyson work better.

The first step is to empty the dust canister and brush roll. This is easy and usually done with the help of the red lever on top of the bin.

1. Empty the canister

A Dyson vacuum is a great way to keep your home clean and tidy. But, over time, it can build up a layer of dust and debris inside its canister.

That’s why it’s important to empty it regularly to avoid this problem. However, emptying a Dyson canister isn’t always easy, so knowing the proper steps is helpful.

First, you’ll need to locate the filter on your Dyson. It’s often purple and situated near the cyclone.

2. Clean the filter

The filters on a Dyson vacuum help trap dirt and dust before they can recirculate back into your home. It’s essential to clean them regularly to keep your vacuum working at its best, especially if you have pets or live in a dusty environment.

To clean the filter, first, remove it from the vacuum. For some models, you’ll need to unscrew the filter from the top of the unit, but for others, it will be tucked away underneath the cyclones or inside the main body.

3. Check the hose for blockages

When a vacuum hose gets clogged, it can cause a loss of suction and affect your vacuum’s ability to pick up dust and debris. Cleaning the hose is necessary to prevent these problems from occurring.

On average, you should clean your vacuum’s hose around once a month. This can encourage correct air movement and help prevent foul odors.

4. Untangle the brush roll

To get the most out of your vacuum cleaning regimen, you should take the time to clean and maintain your Dyson properly. Besides vacuuming, it’s also essential to clean out the canister and brush bar.

Fortunately, cleaning these parts isn’t as complicated as it sounds. For starters, it’s essential to unplug the machine for safety reasons. Then, you can use a microfiber cloth to wipe down the dust canister and filter before moving to the brush bar.

5. Clean the attachments

Your vacuum has many attachments that can be used to clean various surfaces. Some of these tools are flexible and bendable for tight spaces or behind furniture.

As with the brush bar, it’s essential to regularly clean any accumulated debris on these tools so they can perform their best. Dyson recommends cleaning these tools every month.

This will also help your vacuum’s suction, and general pick-up stay at peak performance levels. Additionally, it will help extend the life of your Dyson vacuum cleaner.

6. Wipe down the exterior

Over time, dust and dirt can build up on the side of the vacuum’s canister. It can also cause a clog in the clear bin’s cyclones, reducing airflow and impairing vacuum power.

To prevent this from happening, empty the vacuum’s canister once it’s complete, and give the clear bin a wipe-down with a damp microfiber cloth. Leave the canister to dry before you reattach it to the machine.

Unlike other vacuum cleaners, Dyson models have small cyclones that filter the air stream before it goes into the canister. These small cyclones can clog up quickly, so cleaning them regularly is essential to maintaining your vacuum’s performance.

7. Reassemble

If you’ve been using your Dyson for a while and it’s starting to lose suction or look grimy, it may be time for a good cleaning. It doesn’t take much work to get your Dyson cleaner back to its best, and it can help increase your vacuum’s lifespan.

First, you’ll need to clean the filters with your Dyson. These can be washed under water and should be done every three months.